1. Working conditions of plastic molds
Due to the development of plastics and plastic molding industry, the quality requirements for plastic molds are becoming increasingly high. Therefore, the failure problem and influencing factors of plastic molds have become an important research topic. The main working parts of plastic molds are molded parts, such as convex molds, concave molds, etc. They form the cavity of plastic molds to shape various surfaces of plastic parts and directly contact with plastic, withstanding pressure, temperature, friction, and corrosion.
2. Analysis of Failure Causes of Plastic Mold Materials
The general mold manufacturing process includes mold design, material selection, heat treatment, mechanical processing, debugging, and installation. According to the survey, the materials and heat treatment used in molds are the main factors affecting their service life. From the perspective of Total Quality Management, the factors that affect the service life of molds cannot be measured as the sum of polynomials, but rather as the product of multiple factors. Therefore, the quality of mold materials and heat treatment is particularly important throughout the entire mold manufacturing process.
From the common phenomenon of mold failure analysis, plastic molds can experience wear failure, local deformation failure, and fracture failure during service. The important failure modes of plastic molds can be divided into wear failure, local plastic deformation failure, and fracture failure.
3. With the rapid development of manufacturing industry, plastic molds are indispensable tools in plastic molding processing, and their proportion in the total mold production is increasing year by year. With the development and continuous production of high-performance plastics, the types of plastic products are increasing, and their uses are expanding. Products are developing towards precision, large-scale, and complexity. The development of high-speed molding production has led to increasingly complex working conditions for molds.
1) Wear and corrosion on the surface of the mold cavity
Plastic melt flows in the mold cavity under a certain pressure, and the solidified plastic parts come out of the mold, causing friction and wear on the molding surface of the mold. The fundamental reason for the wear and failure of plastic molds is the friction between the mold and the material. But the specific form and process of wear are related to many factors, such as the pressure, temperature, material deformation speed, and lubrication condition of the mold during operation. When the materials and heat treatment used in plastic molds are unreasonable, the surface hardness of the mold cavity is low and the wear resistance is poor. This is manifested as: dimensional deviations caused by wear and deformation of the mold cavity surface; The roughness value increases due to fuzzing, and the surface quality deteriorates. Especially when solid materials are used to enter the mold cavity, it will exacerbate the wear of the cavity surface. In addition, plastic processing contains chlorine, fluorine and other components that decompose into corrosive gases HC1 and HF when heated, causing corrosion and wear on the surface of the plastic mold cavity, leading to failure. If there is wear and tear damage at the same time, causing damage to the coating or other protective layers on the surface of the mold cavity, it will promote the corrosion process. The interaction of two types of damage accelerates corrosion and wear failure.
2) Plastic deformation failure
The surface of plastic mold cavity under pressure and heat can cause plastic deformation and failure, especially when small molds work on large tonnage equipment, they are more prone to overload plastic deformation. The materials used in plastic molds have insufficient strength and toughness, and low deformation resistance; Another reason for plastic deformation failure is that the hardening layer on the surface of the mold cavity is too thin, the deformation resistance is insufficient, or the working temperature is higher than the tempering temperature, resulting in phase transformation softening and early failure of the mold.
3) Fracture
The main cause of fracture is structural stress, thermal stress, or insufficient tempering due to structure and temperature difference. At the operating temperature, residual austenite transforms into martensite, causing local volume expansion and tissue stress inside the mold.
The working conditions of plastic molds are different from those of cold stamping dies, generally requiring operation at 150 ℃ -200 ℃. In addition to being subjected to certain pressure, they also have to withstand temperature effects. The same mold can have multiple failure modes, and even on the same mold, multiple damages may occur. From the failure modes of plastic molds, it can be seen that reasonable selection of plastic mold materials and heat treatment are very important, as they directly affect the service life of the mold. So, the steel used for plastic molds should meet the following requirements:
1) Heat resistance performance
With the emergence of high-speed molding machinery, the operating speed of plastic products has increased. Due to the molding temperature being between 200-350 ℃, if the plastic has poor flowability and the molding speed is fast, the surface temperature of the molded part of the mold will exceed 400 ℃ in a very short period of time. To ensure the accuracy and minimal deformation of the mold during use, the mold steel should have high heat resistance.
2) Sufficient wear resistance
With the expansion of the use of plastic products, inorganic materials such as glass fiber are often added to plastics to enhance their plasticity. Due to the addition of additives, the flowability of plastics is greatly reduced, leading to mold wear. Therefore, it is required to have good wear resistance.
3) Excellent machinability
Most plastic molding molds require certain cutting and fitter repairs in addition to electrical discharge machining. To extend the service life of cutting tools, there is less work hardening during the cutting process. To avoid mold deformation affecting accuracy, it is hoped that residual stresses during processing can be controlled to a minimum.
4) Good thermal stability
The shape of plastic injection mold parts is often complex and difficult to process after quenching, so materials with good thermal stability should be selected as much as possible.
5) Mirror processing performance
The surface of the mold cavity is smooth, and the molding surface is required to be polished into a mirror surface with a surface roughness of less than Ra0.4 μ m to ensure the appearance of the plastic pressing parts and facilitate demolding.
6) Heat treatment performance
In mold failure accidents, the proportion of accidents caused by heat treatment is generally 52.3%, making heat treatment an important part of the entire mold manufacturing process. The quality of the heat treatment process has a significant impact on the quality of the mold. Generally, it is required that the heat treatment deformation be small, the quenching temperature range be wide, the overheating sensitivity be low, especially with high quenching hardness and hardenability.
7) Corrosion resistance
During the forming process, corrosive gases such as HC1 and HF may be released and thermally decomposed to produce corrosive gases that corrode the mold. Sometimes, the mold may rust and be damaged at the air flow channel, so it is required that the mold steel has good corrosion resistance.
4. New plastic mold steel
Generally, plastic molds are made of normalized 45 steel or 40Cr steel through quenching and tempering. Plastic molds with high hardness requirements are made of steel such as CrWMn or Crl2MoV. For plastic molds with high working temperatures, high toughness hot work mold steel can be chosen. In order to meet the higher requirements for dimensional accuracy and surface quality of plastic mold cavities, a series of new mold steels have recently been developed.
1) Carbonized plastic mold steel
Carbonized plastic mold steel is mainly used for cold extrusion molding of complex plastic molds with cavities. This type of steel has a low carbon content and is often added with the element Cr, while adding appropriate amounts of Ni, Mo, and V to improve hardenability and carburizing ability. In order to facilitate cold extrusion molding, this type of steel must have high plasticity and low deformation resistance in the annealed state, with an annealed hardness of ≤ 100HBS. After cold extrusion forming, carburizing and quenching tempering treatment are carried out, and the surface hardness can reach 58-62HRC. There are specialized steel grades for this type of steel abroad, such as 8416 from Sweden, P2 and P4 from the United States, etc. 12CrNi3A and 12Cr2Ni4A steel, as well as 20Cr2Ni4A, are commonly used domestically. They have good wear resistance, no collapse or surface peeling, and improve the service life of molds. The elements Cr, Ni, Mo, and V in steel increase the hardness and wear resistance of the carburized layer, as well as the strength and toughness of the core.
2) Pre hardened plastic mold steel
The carbon content of this type of steel is 0.3% - O.55%, and commonly used alloying elements include Cr, Ni, Mn, V, etc. In order to improve its machinability, elements such as s and ca were added. Several typical plastic mold steels, Y55CrNiMn MoVS (SMI), were developed and introduced. SMI is a Chinese made S-series easy cutting plastic mold steel, characterized by a pre hardened delivery hardness of 35-40 HRC, good cutting processability, and no heat treatment after processing, which can be used directly. Adding Ni solid solution for strengthening and increasing toughness, and adding Mn and S to form a free cutting phase MnS; Adding Cr, Mo, and V to increase the hardenability of the steel, 8Cr2S steel is sufficient for easy cutting precision mold steel.
3) Time hardening plastic mold steel
Developed low cobalt, cobalt free, and low nickel martensitic aging steel, MASI is a typical martensitic aging steel. After 8150C solution treatment, the hardness is 28-32HRC. After mechanical processing and 4800C aging, intermetallic compounds such as Ni3Mo and Ni3Ti are broken out during aging, resulting in a hardness of 48-52 HRC. Steel has high strength and toughness, small size changes during aging, and good welding performance, but it is expensive and not very popular in China.
4) Corrosion resistant plastic mold steel
Plastic products made from polyvinyl chloride (PVC) and ABS with fire-resistant resin as raw materials decompose and produce corrosive gases during the forming process, which can corrode the mold. Therefore, it is required that plastic mold steel has good corrosion resistance. There are two types of commonly used corrosion-resistant mold steels abroad: martensitic stainless steel and precipitation hardening stainless steel. There are foreign companies such as STVAX (4Crl3) and A SSAB-8407 from ASSAB in Sweden.
Jul 12, 2024
Leave a message
Material selection for plastic molds
Send Inquiry





